When moving tumble dryer parts wear (such as a bearing) it's not uncommon for this to impact other working components. The most common symptoms a customer will report when a Hotpoint dryer rear bearing starts to wear is a loud squeeking or screeching noise. Generally, when inspecting a worn bearing, you will find black sooty type deposits in the vicinity of the bearing. Visually you will see an elongation of the bearing hole (at the bottom) as all the pressure pulls down due to the belt tension and of course the load.
Other Things to Check
Check the drum shaft for wear
Check that the drum shaft has not started to cut into the dryer rear panel. If so, the drum shaft must be replaced also.
Check the drive belt condition
Check the jockey wheel condition
Check the front drum slides and felt
Need to Buy a Hotpoint Teardrop Bearing? You can purchase it direct from our online store
Image of a Hotpoint/Indesit/Creda/Swan Teardrop Shape Rear Bearing
Part Number C00142628
